HP Web Jetadmin Premium Support (PDF 317KB). A comprehensive remote support package that grants access to HP’s Enterprise tech support engineers who provide advice and troubleshooting expertise and electronic access to comprehensive product and support information. HP Web Jetadmin Consulting Services (PDF 123KB). We provide your WJA. HP Printer Utility, Free Download by Hewlett-Packard. It enables you to automatically switch the default printer for each program.
Printable version
HP ProLiant Array Configuration Utility for Windows 64-bit
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Software - System Management
Version:
9.40.12.0(19 Feb 2013)
Operating System(s):
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Storage Server 2003 x64 Editions
Microsoft Windows Unified Data Storage Server 2003 x64 Edition
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional x64 Edition
Microsoft Windows 7 (64-bit)
File name:
cp018121.exe (6.0 MB)
The HP Array Configuration Utility is a web-based application that helps you configure HP ProLiant SMART-2 Array Controllers, HP ProLiant Smart Array Controllers, HP ProLiant Integrated Smart Array Controllers, and HP ProLiant StorageWorks RAID Array Controllers. You can use the Array Configuration Utility for several tasks such as configuring the array controller initially, adding disk drives to an existing configuration, or to reconfigure your array controller.
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:
cp018121.exe
655003c29b4cfcfc29c376aa8d77c6c5
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation. The utility will automatically be installed.
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes: For support for ACU or Smart Array controllers, please visit Contact HP.
For feedback or suggestions on ACU, please send comments to [email protected]; however, we regret that support cannot be provided through this address.
The legacy ACU (native win32 application) and ACU executables can not be run on the same server at the same time; however, configurations created with one utility should be compatible with those created by the other.
Users will automatically be logged out after a predetermined period of inactivity when using ACU and will have to re-login.
On the Web-based Management Device Homepage, under 'options', 'Anonymous Access' should be enabled when using ACU.
When clicking on a controller that is currently being configured in a different ACU session, a message will appear which allows you to override the other ACU session or cancel. If you choose to override the other ACU session, any unsaved changes in the other session will be discarded.
To uninstall ACU, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run ACU in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.
When using Linux as the host operating system, if a Smart Array controller has 16 or more volumes configured, deleting any volume in the ACU will not update the /proc/partitions to reflect the deletion of the device node associated with that volume. Rebooting the server will cause the update to happen. Note that there is also a limitation that only the first 16 volumes configured will be available to the operating system.
Version:9.40.12.0(B) (3 May 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Install this 9.40.12.0 (B) version if you require Windows Server 2008 R2. If you have successfully installed 9.40.12.0, then there is no need to install 9.40.12.0 (B).
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
Version:9.40.12.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
Version:9.30.15.0 (26 Oct 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Logical Drive Movement enhancements Version:9.20.9.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for Smart Array P721m Version:9.10.22.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for the following controllers:
HP Dynamic Smart Array B120i
HP Dynamic Smart Array B320i
HP Smart Array P822
Added support for Simplified Chinese Now officially supporting and providing native X64 versions in addition to existing 32 bit versions Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key:
Replace Array
Allows the transfer of contents of an array to an existing empty array or a new array. All logical drives from the source array will be transferred. The original array will be deleted and its data drives will be freed as unassigned drives. The drive types at source and destination arrays can be different. This allows moving data from SATA to SAS, or SAS to SATA. However, the drive types comprising the array must still be of the same type.
Heal Array
Allows the replacement of failed or degraded physical drives in an array with healthy physical drives. The original array and logical drive numbering will be unaffected after the replacement. The replacement physical drives must be of the same interface type (such as SAS, SATA and etc.) as the original drives. The operation will be available only if enough unassigned physical drives of the correct size are available.
Spilt Mirror BackupRollback
Create Split Mirror Backup
This task splits an array that consists of one or more RAID1, RAID 1+0, RAID 1 (ADM), or RAID 10 (ADM) and creates two arrays: A primary array and a backup array. The new arrays have the following characteristics:
If the original array contained RAID 1 or RAID 1+0 drives, the primary array will contain RAID 0 drives.
If the original array contained RAID 1 (ADM) drives, the primary array will contain RAID 1 drives.
If the original array contained RAID 10 (ADM) drives, the primary array will contain RAID 1+0 drives.
The backup array always contains RAID 0 logical drives.
The primary array continues to be fully accessible to the operating system while the backup array is hidden from the operating system.
This feature is useful when you want to capture a backup before performing a risky operation. The Manage Split Mirror Backup operation can be used to either re-mirror the primary and backup arrays, or to make the backup array into an independent array which can be accessed by the operating system.
Manage Split Mirror Backup
This task allows for the management of the primary and backup arrays created by the Create Split Mirror Backup operation. When the operation is performed on a primary array, the following options are available:
Re-mirror the array and preserve the existing data. Discard the backup array. This option re-creates the original mirrored array with the contents of the primary array.
Re-mirror the array and rollback to the contents of the backup array. Discard existing data. This option re-creates the mirrored array but restores its contents to the point in time when the backup array was created. It is not recommended that this option be performed online, or while the logical drive to be rolled back is mounted or in use by the operating system.
Activate the backup array. This option makes the backup array fully accessible to the operating system.
Note: In the case where the primary array is no longer available. This task can only be used to activate the backup array.
Type:
Software - System Management
Version:
9.40.12.0(19 Feb 2013)
Operating System(s):
Microsoft Windows 7 (64-bit)
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Storage Server 2003 x64 Editions
Microsoft Windows Unified Data Storage Server 2003 x64 Edition
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional x64 Edition
Description
The HP Array Configuration Utility is a web-based application that helps you configure HP ProLiant SMART-2 Array Controllers, HP ProLiant Smart Array Controllers, HP ProLiant Integrated Smart Array Controllers, and HP ProLiant StorageWorks RAID Array Controllers. You can use the Array Configuration Utility for several tasks such as configuring the array controller initially, adding disk drives to an existing configuration, or to reconfigure your array controller.
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
Installation Instructions
To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:
cp018121.exe
655003c29b4cfcfc29c376aa8d77c6c5
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation. The utility will automatically be installed.
Release Notes
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes: For support for ACU or Smart Array controllers, please visit Contact HP.
For feedback or suggestions on ACU, please send comments to [email protected]; however, we regret that support cannot be provided through this address.
The legacy ACU (native win32 application) and ACU executables can not be run on the same server at the same time; however, configurations created with one utility should be compatible with those created by the other.
Users will automatically be logged out after a predetermined period of inactivity when using ACU and will have to re-login.
On the Web-based Management Device Homepage, under 'options', 'Anonymous Access' should be enabled when using ACU.
When clicking on a controller that is currently being configured in a different ACU session, a message will appear which allows you to override the other ACU session or cancel. If you choose to override the other ACU session, any unsaved changes in the other session will be discarded.
To uninstall ACU, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run ACU in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.
When using Linux as the host operating system, if a Smart Array controller has 16 or more volumes configured, deleting any volume in the ACU will not update the /proc/partitions to reflect the deletion of the device node associated with that volume. Rebooting the server will cause the update to happen. Note that there is also a limitation that only the first 16 volumes configured will be available to the operating system.
Revision History
Version:9.40.12.0(B) (3 May 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Install this 9.40.12.0 (B) version if you require Windows Server 2008 R2. If you have successfully installed 9.40.12.0, then there is no need to install 9.40.12.0 (B).
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
Version:9.40.12.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for: HP SmartCache - accelerate data access by using SSD drives as cache Auto Replace Drive - new spare mode Full RPI - Rapid Parity Initialization
Version:9.30.15.0 (26 Oct 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Logical Drive Movement enhancements Version:9.20.9.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for Smart Array P721m Version:9.10.22.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for the following controllers:
HP Dynamic Smart Array B120i
HP Dynamic Smart Array B320i
HP Smart Array P822
Added support for Simplified Chinese Now officially supporting and providing native X64 versions in addition to existing 32 bit versions Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key: Best 3d modeling software.
Replace Array
Allows the transfer of contents of an array to an existing empty array or a new array. All logical drives from the source array will be transferred. The original array will be deleted and its data drives will be freed as unassigned drives. The drive types at source and destination arrays can be different. This allows moving data from SATA to SAS, or SAS to SATA. However, the drive types comprising the array must still be of the same type.
Heal Array
Allows the replacement of failed or degraded physical drives in an array with healthy physical drives. The original array and logical drive numbering will be unaffected after the replacement. The replacement physical drives must be of the same interface type (such as SAS, SATA and etc.) as the original drives. The operation will be available only if enough unassigned physical drives of the correct size are available.
Spilt Mirror BackupRollback
Create Split Mirror Backup
This task splits an array that consists of one or more RAID1, RAID 1+0, RAID 1 (ADM), or RAID 10 (ADM) and creates two arrays: A primary array and a backup array. The new arrays have the following characteristics:
If the original array contained RAID 1 or RAID 1+0 drives, the primary array will contain RAID 0 drives.
If the original array contained RAID 1 (ADM) drives, the primary array will contain RAID 1 drives.
If the original array contained RAID 10 (ADM) drives, the primary array will contain RAID 1+0 drives.
The backup array always contains RAID 0 logical drives.
The primary array continues to be fully accessible to the operating system while the backup array is hidden from the operating system.
This feature is useful when you want to capture a backup before performing a risky operation. The Manage Split Mirror Backup operation can be used to either re-mirror the primary and backup arrays, or to make the backup array into an independent array which can be accessed by the operating system.
Manage Split Mirror Backup
This task allows for the management of the primary and backup arrays created by the Create Split Mirror Backup operation. When the operation is performed on a primary array, the following options are available:
Re-mirror the array and preserve the existing data. Discard the backup array. This option re-creates the original mirrored array with the contents of the primary array.
Re-mirror the array and rollback to the contents of the backup array. Discard existing data. This option re-creates the mirrored array but restores its contents to the point in time when the backup array was created. It is not recommended that this option be performed online, or while the logical drive to be rolled back is mounted or in use by the operating system.
Activate the backup array. This option makes the backup array fully accessible to the operating system.
Note: In the case where the primary array is no longer available. This task can only be used to activate the backup array.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Download Software And Drivers For Hp Printer
Printable version
Hp Utility Software Update
Download the latest drivers, software, firmware, and diagnostics for your HP products from the official HP Support website. HP System Event Utility 1.4.33 is available to all software users as a free download for Windows 10 PCs but also without a hitch on Windows 7 and Windows 8. Compatibility with this software may vary, but will generally run fine under Microsoft Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista and Windows XP on either a 32-bit or 64.
HP Network Configuration Utility for Windows Server 2008 R2
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Driver - Network
Version:
10.50.0.0(27 Mar 2012)
Operating System(s):
Microsoft Windows Server 2008 R2
File name:
cp014726.exe (14 MB)
This package contains the teaming and configuration utility for HP ProLiant NICs running under Microsoft Windows Server 2008 R2. This utility allows you to configure and manage fault-tolerant teams of adapters installed in ProLiant servers.
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 2-port 361i Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 552M Adapter
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:
'This program has been blocked for your protection'
'Blocked'
'Not Trusted'
MSIExec installation error (Return code: 1625)
'The recommended software listed below could not be installed…'
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
End User License Agreements: Hewlett-Packard End User License Agreement
When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:
'This program has been blocked for your protection'
'Blocked'
'Not Trusted'
MSIExec installation error (Return code: 1625)
'The recommended software listed below could not be installed…'
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes: Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.
Version:11.50.0.0 (24 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
HP Ethernet 10Gb 2-port 557SFP+ Adapter
HP FlexFabric 20Gb 2-port 650FLB Adapter
HP FlexFabric 20Gb 2-port 650M Adapter
HP StoreFabric CN1200E Dual Port Converged Network Adapter
HPE StoreFabric CN1200E-T Adapter
Version:10.90.0.0(B) (9 Sep 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component addresses an issue which results in extremely long installation times on systems with a large number of virtual miniports. Version:10.90.0.0 (26 Apr 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP FlexFabric 20Gb 2-port 630FLB Adapter
HP FlexFabric 20Gb 2-port 630M Adapter
Version:10.85.0.0 (18 Feb 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue that results in a network disconnect when NCU is opened for the first time. This software addresses an issue where updating CISCO switch firmware prevents an 802.3ad team from forming.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 363i Adapter
HP Ethernet 1Gb 1-port 364i Adapter
HP Ethernet 1Gb 2-port 367i Adapter
HP Ethernet 10Gb 2-port 562i Adapter
Version:10.80.0.0 (10 Sep 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where using an HP Ethernet 1Gb 4-port 331FLR Adapter in an HP NIC Teaming 802.3ad team configuration results in a Windows Stop Error (BSOD). This software addresses an issue where a Windows Stop Error (BSOD) could occur during Link Aggregation Control Protocol (LACP) negotiation when using Automatic and 802.3ad team types. In conjunction with HP Broadcom 1Gb Driver version 16.0.0.7 or later, this software addresses an issue which could result in a disabled team status if the team was created with Large Send Offload version 1 over IPv4 (LCOV1IPv4). This software addresses an issue which could result in a disabled team status if the team has Receive Side Scaling (RSS) enabled and contains devices supported by an HP Emulex 10Gb Driver for Windows.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 332i Adapter
HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLB Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534M Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP Ethernet 10Gb 2-port 561T Adapter
HP StoreFabric CN1100R Dual Port Converged Network Adapter
Version:10.70.0.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device. This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter. This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.
This software now supports the following network adapters:
HP Ethernet 1Gb 4P 366FLR Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560M Adapter
Version:10.65.0.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331i-SPI Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
Version:10.60.0.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software will now show auto negotiation flow control information only when a network adapter has links connected. This software no longer provides Wake-On-LAN support for the HP Flex-10 10Gb 2-port 530M Adapter.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 330i Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361FLB Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP Ethernet 1Gb 4-port 366i Adapter
HP Ethernet 1Gb 4-port 366M Adapter
HP Ethernet 10Gb 2-port 530SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLB Adapter
This software now supports MAC-based NIC, VLAN and teaming configurations using the command-line tool “cqniccmd.exe” with the /M operator. This software now displays the firmware version of HP Intel E1E Series network adapters. This software now supports Receive-Side Scaling (RSS) for the HP Intel E1E series network adapters. This software now provides Receive-Side Scaling (RSS) property support for the VLAN and NIC teaming of HP Intel E1E series network adapters.
Version:10.50.0.0 (27 Mar 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 2-port 361i Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 552M Adapter
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
Version:10.45.0.0 (11 Nov 2011)
Macbook air 2019 keyboard type. Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software corrects an issue that can result in incorrect team speed when used with Virtual Connect. Version:10.40.0.0 (6 May 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports Receive-Side Scaling (RSS) Teaming.
This software now supports the following network adapters:
HP NC525m 10Gb 2-port FlexFabric Converged Network Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP StorageWorks CN1100E Dual Port Converged Network Adapter
Version:10.30.0.0 (24 Feb 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP NC112i 1-port Ethernet Server Adapter
HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter
Version:10.20.0.0 (B) (12 Jan 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now correctly recognizes the HP StorageWorks CN1000Q Dual Port Converged Network Adapter. Version:10.20.0.0 (15 Dec 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The number of receive descriptors for Mellanox adapters is now configurable.
This software now supports the following network adapters:
HP NC523SFP 10Gb 2-port Ethernet Server Adapter
HP StorageWorks CN1000Q Dual Port Converged Network Adapter
Version:10.10.0.0 (9 Sep 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Broadcom Multifunction adapters now support a maximum frame size of 1324.
For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 5000 for Broadcom NX2 1GB adapters.
For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 3000 for Broadcom NX2 10GB adapters.
Flex-10 is now supported on Mellanox network adapters.
This software will support VLANs created in Hyper-V Virtual Machines.
This product now supports the following network adapters:
HP NC552m 10Gb 2-port FlexFabric Converged Network Adapter
HP NC543i 2-port 4x QDR IB/10Gb Adapter
Version:10.0.0.0 (27 May 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
HP NC365T 4-port Ethernet Server Adapter
HP NC543i 1-port 4x QDR IB/Flex-10 10Gb Adapter
HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter
Version:9.90.1.0 (8 Feb 2010)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This software no longer crashes when the VLAN TAB on a teamed device is selected.
This software no longer throws an error message when the VLAN button on a teamed device is selected.
This software no longer causes VLANs to stop communicating when one of them is disabled when running under Windows Server 2008.
This software now supports the following network adapters:
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC550SFP Dual Port 10GbE Server Adapter
HP NC550m Dual Port Flex-10 10GbE BL-c Adapter
HP StorageWorks CN1000E Dual Port Converged Network Adapter
Version:9.80.1.0 (12 Nov 2009)
This software now supports the HP NC375T PCI Express Quad Port Gigabit Server Adapter.
Version:9.70.0.0 (18 Aug 2009)
Initial release.
Version:10.61.0.0 (1 May 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the teaming driver may not initiate a failover when the NIC miniport driver indicates that the primary teamed NIC has been reset.
Type:
Driver - Network
Version:
10.50.0.0(27 Mar 2012)
Operating System(s):
Microsoft Windows Server 2008 R2
Description
This package contains the teaming and configuration utility for HP ProLiant NICs running under Microsoft Windows Server 2008 R2. This utility allows you to configure and manage fault-tolerant teams of adapters installed in ProLiant servers.
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 2-port 361i Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 552M Adapter
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
Installation Instructions
When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:
'This program has been blocked for your protection'
'Blocked'
'Not Trusted'
MSIExec installation error (Return code: 1625)
'The recommended software listed below could not be installed…'
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Release Notes
End User License Agreements: Hewlett-Packard End User License Agreement
When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:
'This program has been blocked for your protection'
'Blocked'
'Not Trusted'
MSIExec installation error (Return code: 1625)
'The recommended software listed below could not be installed…'
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Notes: Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.
Revision History
Version:11.50.0.0 (24 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
HP Ethernet 10Gb 2-port 557SFP+ Adapter
HP FlexFabric 20Gb 2-port 650FLB Adapter
HP FlexFabric 20Gb 2-port 650M Adapter
HP StoreFabric CN1200E Dual Port Converged Network Adapter
HPE StoreFabric CN1200E-T Adapter
Version:10.90.0.0(B) (9 Sep 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component addresses an issue which results in extremely long installation times on systems with a large number of virtual miniports. Version:10.90.0.0 (26 Apr 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP FlexFabric 20Gb 2-port 630FLB Adapter
HP FlexFabric 20Gb 2-port 630M Adapter
Version:10.85.0.0 (18 Feb 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue that results in a network disconnect when NCU is opened for the first time. This software addresses an issue where updating CISCO switch firmware prevents an 802.3ad team from forming.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 363i Adapter
HP Ethernet 1Gb 1-port 364i Adapter
HP Ethernet 1Gb 2-port 367i Adapter
HP Ethernet 10Gb 2-port 562i Adapter
Version:10.80.0.0 (10 Sep 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where using an HP Ethernet 1Gb 4-port 331FLR Adapter in an HP NIC Teaming 802.3ad team configuration results in a Windows Stop Error (BSOD). This software addresses an issue where a Windows Stop Error (BSOD) could occur during Link Aggregation Control Protocol (LACP) negotiation when using Automatic and 802.3ad team types. In conjunction with HP Broadcom 1Gb Driver version 16.0.0.7 or later, this software addresses an issue which could result in a disabled team status if the team was created with Large Send Offload version 1 over IPv4 (LCOV1IPv4). This software addresses an issue which could result in a disabled team status if the team has Receive Side Scaling (RSS) enabled and contains devices supported by an HP Emulex 10Gb Driver for Windows.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 332i Adapter
HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLB Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534M Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP Ethernet 10Gb 2-port 561T Adapter
HP StoreFabric CN1100R Dual Port Converged Network Adapter
Version:10.70.0.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device. This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter. This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.
This software now supports the following network adapters:
HP Ethernet 1Gb 4P 366FLR Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560M Adapter
Version:10.65.0.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331i-SPI Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
Version:10.60.0.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software will now show auto negotiation flow control information only when a network adapter has links connected. This software no longer provides Wake-On-LAN support for the HP Flex-10 10Gb 2-port 530M Adapter.
This software now supports the following network adapters:
HP Ethernet 1Gb 2-port 330i Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361FLB Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP Ethernet 1Gb 4-port 366i Adapter
HP Ethernet 1Gb 4-port 366M Adapter
HP Ethernet 10Gb 2-port 530SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLB Adapter
This software now supports MAC-based NIC, VLAN and teaming configurations using the command-line tool “cqniccmd.exe” with the /M operator. This software now displays the firmware version of HP Intel E1E Series network adapters. This software now supports Receive-Side Scaling (RSS) for the HP Intel E1E series network adapters. This software now provides Receive-Side Scaling (RSS) property support for the VLAN and NIC teaming of HP Intel E1E series network adapters.
Version:10.50.0.0 (27 Mar 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 2-port 361i Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 552M Adapter
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
Version:10.45.0.0 (11 Nov 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software corrects an issue that can result in incorrect team speed when used with Virtual Connect. Version:10.40.0.0 (6 May 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports Receive-Side Scaling (RSS) Teaming.
This software now supports the following network adapters:
HP NC525m 10Gb 2-port FlexFabric Converged Network Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP StorageWorks CN1100E Dual Port Converged Network Adapter
Version:10.30.0.0 (24 Feb 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software now supports the following network adapters:
HP NC112i 1-port Ethernet Server Adapter
HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter
Version:10.20.0.0 (B) (12 Jan 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component now correctly recognizes the HP StorageWorks CN1000Q Dual Port Converged Network Adapter. Version:10.20.0.0 (15 Dec 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The number of receive descriptors for Mellanox adapters is now configurable.
This software now supports the following network adapters:
HP NC523SFP 10Gb 2-port Ethernet Server Adapter
HP StorageWorks CN1000Q Dual Port Converged Network Adapter
Version:10.10.0.0 (9 Sep 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Broadcom Multifunction adapters now support a maximum frame size of 1324.
For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 5000 for Broadcom NX2 1GB adapters.
For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 3000 for Broadcom NX2 10GB adapters.
Flex-10 is now supported on Mellanox network adapters.
This software will support VLANs created in Hyper-V Virtual Machines.
This product now supports the following network adapters:
HP NC552m 10Gb 2-port FlexFabric Converged Network Adapter
HP NC543i 2-port 4x QDR IB/10Gb Adapter
Version:10.0.0.0 (27 May 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This product now supports the following network adapters:
HP NC365T 4-port Ethernet Server Adapter
HP NC543i 1-port 4x QDR IB/Flex-10 10Gb Adapter
HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter
Version:9.90.1.0 (8 Feb 2010)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This software no longer crashes when the VLAN TAB on a teamed device is selected.
This software no longer throws an error message when the VLAN button on a teamed device is selected.
This software no longer causes VLANs to stop communicating when one of them is disabled when running under Windows Server 2008.
This software now supports the following network adapters:
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC550SFP Dual Port 10GbE Server Adapter
HP NC550m Dual Port Flex-10 10GbE BL-c Adapter
HP StorageWorks CN1000E Dual Port Converged Network Adapter
Version:9.80.1.0 (12 Nov 2009)
This software now supports the HP NC375T PCI Express Quad Port Gigabit Server Adapter.
Version:9.70.0.0 (18 Aug 2009)
Initial release.
Version:10.61.0.0 (1 May 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This software addresses an issue where the teaming driver may not initiate a failover when the NIC miniport driver indicates that the primary teamed NIC has been reset.
Hp Utility Software For Printers
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.